PFD/ND XFR "latch" pushbutton

Post Reply
User avatar
OmniAtlas
Posts: 699
Joined: 20 Sep 2012, 08:49
Location: Sydney, Australia
Contact:

PFD/ND XFR "latch" pushbutton

Post by OmniAtlas »

With the OEM panel the PFD/ND uses a relay which switches the PFD/ND XFR pushbutton.

As a result of this the CPT and FO XFR pushbutton are latched (in an on position) when the button is pressed. To facilitate the use of the button it must be pressed twice for it to work (ProSim only recognises the command when the pushbutton is released).

Please see here for a video description of the latching - https://www.youtube.com/watch?v=7D2fLxzqWb8

Request the ability to specify the PFD/ND XFR pushbuttons as a latching type button so the appropriate OEM equipment can be used.

Thank you,

Ben
Soarbywire.com - Flight Simulation and Avionic Engineering
Post Reply

Return to “ProSimA320 - Needs & Wishes”