Slow comunication - 1.20b7

[nbworld]

Hi,

Very slow comunication in some parts.
Network is ok

[Pim]

Hallo Nuno,

This is the one from my system with 1.20b7. Ii is similar to yours, but I have no idea if the performance is bad or good. I made a flight this afternoon and I did not notice any problems. It's up to the ProSim guys to comment on this.

Best regards,

--pim

[nbworld]

Hi Pim,

Never seen this like this. Normaly only recalc network are yellow. Now is allways green but the other are not green.
I think that is not good.
And on my system i think that not all lights are ok (i need more tests)
With 4 hours flight tests, the system go down (2 times)...like fuel gone. After give fuel in IOS the engines restart.

This update have some sort of problems. I will go back to 1.19.

[Pim]

Hi All,

Since there is now a watchdog log which reports delays more that 100 ms I have added so the ProSim guys can see what is causing the delays on my system.

Best regards,

--pim

[Opossum]

Hi all,

Basically, I have noticed that the "Aircraft Systems" delay impacts the fps on ND and PFD. You can try this test: set maximum ranges on both ND without displaying weather, airports, nor fix or terrain. Go to your IOS and read the delay figures. The total delay must be about 100ms, and is displayed with red ink even the ND is empty (no flight-plan programmed on MCDU). So, take care at the PFD animation: it is not smooth as usual and fps is about 10. Set back to low ND ranges and see how the total delay on IOS decreases and the smoothness of the PFD returns to normal.

I assume that "Aircraft Systems" result on IOS, corresponds to the period per second used by the ProsimA320-System.exe program.

Why the "aircraft systems" load increases excessively with ND range even no data is displayed on ND (flight-plan, airports, fix, weather, terrain...) ?

Best regards