ProSimA320 version 1.48

Announcements by the ProSim-AR team
Locked
User avatar
martin.vsetecka
Posts: 186
Joined: 01 Aug 2016, 16:47

ProSimA320 version 1.48

Post by martin.vsetecka »

June 18 Release version 1.48
===========================

Systems:
- Fixed APU ECB target N1 should be 99% based on bleed demand
- Tuned bleed air demand of air starter to allow more realistic N1 requirements for cross bleed start
- Improved N1/N2 parameters when windmilling
- Fixed engine parameter input to FWC when EIU/FADEC fails

Flight guidance:
- Tuned clb mode to better maintain speed when activated

FMS:
- Added FLS approach type option (beta). This can be switched on as an option and will replace the regular APP NAV with F-LOC and F-G/S modes.
- Do not command F speed if flaps is set to 3 during flaps 3 approach
- For block altitude constraints, target conflicting altitude (either the lower of higher limit) instead of always the lowest altitude to build vnav path
- Added shallow segments in vnav path where larger speed reductions are needed due to constraints during descend
- Fixed display and processing of managed speed in DES PERF page

Displays:
- Refined logic for when ND renders white SEC FPLN and when it is not visible
- Reworked marker indication in PFD

Hardware:
- Added standby speed gauge
- Added configurable gates for engine failures
- Improvement in processing time of hardware input/output
- Renamed S_CDU1_KEY_FLPN to S_CDU1_KEY_FPLN and S_CDU2_KEY_FLPN to S_CDU2_KEY_FPLN

Misc:
- Added close all prompt to close all doors in MCDU MAINT DOORS page
- Adjusted ground fuel flow for idle N1
- Add support for 2021 PBR flight model
- Fixed overriding real-time Active Sky weather after position change by ProSimIOS
- Fixed temperature and dew point not shown in AOC weather request when Active Sky is used
- Fixed FS2020 COM frequency setting
- Fix for FS2020 engine starting issues
Martin Vsetecka
ProSim Support
Locked

Return to “ProSimA320 announcements”