Michael Schultz Youtube channel building 737NG pit

737Junky
Posts: 149
Joined: 28 Aug 2016, 08:30
Location: Oosterhout

Re: Michael Schultz Youtube channel building 737NG pit

Post by 737Junky »

Enjoying your videos a lot Michael, keep it up!
With kind Regards,
Stefan
Extraterra
Posts: 79
Joined: 15 May 2017, 22:40

Re: Michael Schultz Youtube channel building 737NG pit

Post by Extraterra »

The pneumatic panel is finished. I present you a new methode of making two colored panels and install the dual needle gauge that I have built before.

https://youtu.be/qkmW3s1LqAw
Extraterra
Posts: 79
Joined: 15 May 2017, 22:40

Re: Michael Schultz Youtube channel building 737NG pit

Post by Extraterra »

I finished the central panel of my overhead. This also brings dimmable backlight to all existing panel segments.

https://www.youtube.com/watch?v=BS7aPCrNpsw
Extraterra
Posts: 79
Joined: 15 May 2017, 22:40

Re: Michael Schultz Youtube channel building 737NG pit

Post by Extraterra »

After the videos about the single and dual needle gauge it was time for the ultimate overhead panel section that combines both of them.
The pressurisation panel has two gauges. One of them is a big dual needle one.

https://youtu.be/blRLygX-jus
Extraterra
Posts: 79
Joined: 15 May 2017, 22:40

Re: Michael Schultz Youtube channel building 737NG pit

Post by Extraterra »

Finally I have finished the lights panel including the most challenging part of it - the self returning start switches.

https://youtu.be/I7Kqpa-pmkg
Extraterra
Posts: 79
Joined: 15 May 2017, 22:40

Re: Michael Schultz Youtube channel building 737NG pit

Post by Extraterra »

Because I'm still waiting for some research utilities for pcb making to arrive, I invested some days to connect all the panel sections of the overhead to their concerning hardware devices.
So maybe you can get some inspiration for your own projects.

https://youtu.be/GjJPIF2c_lU
Extraterra
Posts: 79
Joined: 15 May 2017, 22:40

Re: Michael Schultz Youtube channel building 737NG pit

Post by Extraterra »

Some new sections of the overhead are closed now. I made a dome light and all the empty covers of the lower and aft overhead.
https://youtu.be/vQe589CQuVo
Extraterra
Posts: 79
Joined: 15 May 2017, 22:40

Re: Michael Schultz Youtube channel building 737NG pit

Post by Extraterra »

The ELT & LE Devices Panel is finished. I haven't soldered in so many LEDs before. But now a firework of lights goes on every time the flaps are moving.
https://youtu.be/qIbtuQKdT7k
Extraterra
Posts: 79
Joined: 15 May 2017, 22:40

Re: Michael Schultz Youtube channel building 737NG pit

Post by Extraterra »

After I started the work for the electric panel of my overhead, it is finally finished. The main problem was to make the pcb for the 14 7-segment displays. But more about this long story in the video.

https://youtu.be/EbjMKr0pmTY
Extraterra
Posts: 79
Joined: 15 May 2017, 22:40

Re: Michael Schultz Youtube channel building 737NG pit

Post by Extraterra »

Finally a knew panel section is finished. Today I present the build of the Engine & Oxygen Panel.

https://youtu.be/KFKBihZF9-w
Post Reply

Return to “Cockpit building questions”