Michael Schultz Youtube channel building 737NG pit

737Junky
Posts: 149
Joined: 28 Aug 2016, 08:30
Location: Oosterhout

Re: Michael Schultz Youtube channel building 737NG pit

Post by 737Junky »

Enjoying your videos a lot Michael, keep it up!
With kind Regards,
Stefan
Extraterra
Posts: 61
Joined: 15 May 2017, 22:40

Re: Michael Schultz Youtube channel building 737NG pit

Post by Extraterra »

The pneumatic panel is finished. I present you a new methode of making two colored panels and install the dual needle gauge that I have built before.

https://youtu.be/qkmW3s1LqAw
Extraterra
Posts: 61
Joined: 15 May 2017, 22:40

Re: Michael Schultz Youtube channel building 737NG pit

Post by Extraterra »

I finished the central panel of my overhead. This also brings dimmable backlight to all existing panel segments.

https://www.youtube.com/watch?v=BS7aPCrNpsw
Extraterra
Posts: 61
Joined: 15 May 2017, 22:40

Re: Michael Schultz Youtube channel building 737NG pit

Post by Extraterra »

After the videos about the single and dual needle gauge it was time for the ultimate overhead panel section that combines both of them.
The pressurisation panel has two gauges. One of them is a big dual needle one.

https://youtu.be/blRLygX-jus
Extraterra
Posts: 61
Joined: 15 May 2017, 22:40

Re: Michael Schultz Youtube channel building 737NG pit

Post by Extraterra »

Finally I have finished the lights panel including the most challenging part of it - the self returning start switches.

https://youtu.be/I7Kqpa-pmkg
Extraterra
Posts: 61
Joined: 15 May 2017, 22:40

Re: Michael Schultz Youtube channel building 737NG pit

Post by Extraterra »

Because I'm still waiting for some research utilities for pcb making to arrive, I invested some days to connect all the panel sections of the overhead to their concerning hardware devices.
So maybe you can get some inspiration for your own projects.

https://youtu.be/GjJPIF2c_lU
Post Reply

Return to “Cockpit building questions”