New Phidget libraries (Phidget22)

User avatar
willow
Posts: 2242
Joined: 20 Jul 2011, 14:24
Location: YMHB. Van Diemen's Land, Terra Australis
Contact:

Re: New Phidget libraries (Phidget22)

Post by willow »

I will also add to Kai's post - if a Phidget card is needed please tell me and I will arrange for a card to be sent to you. Kind Regards, WilloW
WilloW (YMHB) 🇦🇺 Always
https://www.flaps2approach.com
Realism using OEM parts ✈️
Avatar: "Miss Tara Black Dog" (sadly missed....RIP Nov 2013)
User avatar
wpslider
Posts: 6479
Joined: 06 Feb 2013, 18:38
Location: Faro - PT
Contact:

Re: New Phidget libraries (Phidget22)

Post by wpslider »

kai kristiansen wrote: 14 Dec 2017, 12:46 OK
As you see in my first post here, I asked Brian Burley at Phidgets and got this answer:

"Yes, the new libraries (Phidget22) are backwards-compatible and work with both old and new Phidgets"
This answer was why I brought this task to the table.

But of course you know what needs to be done in Prosim. This might not be your most important task at the moment.

Yes,....obviously you need a VINT card. If that's a problem for you I can borrow you this:
https://www.phidgets.com/?tier=3&catid= ... prodid=721
And a Wint HUB
Just tell me if/when you deside to look into this.
Kai
Yes, previous cards are compatible, but the problem is way different. I cannot replace the old library with the new one and add the new card. The new library is completely different. Different classes, methods, properties... that's the main issue. I tried already to do this a couple of month ago. But a lot of time would be required to change the code to use the new library.

We can add the new Library, but not for now as we have a lot of work already.

Regards
Humberto Miguel
Image
User avatar
willow
Posts: 2242
Joined: 20 Jul 2011, 14:24
Location: YMHB. Van Diemen's Land, Terra Australis
Contact:

Re: New Phidget libraries (Phidget22)

Post by willow »

Understand completely Humberto. If a card is ever required let me know and I'll have one sent. Cheers, WilloW
WilloW (YMHB) 🇦🇺 Always
https://www.flaps2approach.com
Realism using OEM parts ✈️
Avatar: "Miss Tara Black Dog" (sadly missed....RIP Nov 2013)
fsaviator
Posts: 265
Joined: 06 Dec 2011, 09:09

Re: New Phidget libraries (Phidget22)

Post by fsaviator »

Bringing this thread back to life as I explore options for converting my RevSim TQ.

Is the Phidgets VINT Hub and Library functional in Prosim737 v2 now?

It would be nice to be able to run phidgets motor controllers through the VINT hub connected to the PC, and Prosim737
Warren "MTN385"
http://www.B737NG-Sim.com
P3D45/ Prosim737 2/ ACE Dual-linked Yokes/ RevSim Proline TQ and Dual-linked Rudders/ CPFlight MCP PRO3 and EFIS', MIP737ICS_FULL and SIDE737, Forward and Aft Overheads, Pedestal/ FDS MIP
Post Reply

Return to “Phidgets”