ProSim737 Version 1.16

Announcements by the ProSim-AR team
User avatar
Hanne
Beheerder
Posts: 1299
Joined: 17 Dec 2010, 14:42
Location: Delft
Contact:

ProSim737 Version 1.16

Post by Hanne »

July 26 2012 Release version 1.16
==================================
- Increased width of magenta line
- Ground power available light working even if battery switch is off
- Added "speedbrake extended in air" and "speedbrake extended" gate
- Added CDU EXEC light to ProSim737
- ProSim modules handle read only config files
- Added gates for each flap position
- Fixed looping audio during test in ProSim Audio
- Fixed a problem in the autothrottle where it was unable to reach the N1 limit during FMC_SPD/MCP_SPD mode
- Added support for ICS display dimmers
- VNAV improved to prevent switching from CLB to CRZ mode before reaching cruise altitude
- Added vertical bars to ground alt indicator in PFD Alt tape
- EICAS REV indication now in amber while reversers not locked in position
- Red gear lights also turn on when below 800 feet AGL with idle thrust and gear is not locked
- APU low pressure light now always on when APU switch is not in the OFF position and APU oil pressure low
- Fuel cutoff switches are now enforced by ProSim whenever possible, to stop incorrect starting of engines
andreseko
Posts: 155
Joined: 22 Feb 2011, 17:25
Location: Brasil
Contact:

Re: ProSim737 Version 1.16

Post by andreseko »

Niceeee

Thanks Hanne and Marty, good job
Regards
User avatar
NAX
Posts: 1171
Joined: 26 Dec 2010, 12:22
Location: Oslo - Norway

Re: ProSim737 Version 1.16

Post by NAX »

I want my pit up'n'running again. .. NOW!

Good work guys
----------------------
Norway
Themax
Posts: 263
Joined: 19 Nov 2011, 07:45

Re: ProSim737 Version 1.16

Post by Themax »

Wow, didn't had time to look at the 1.15 and there's the 1.16 :D Great !

Thank you,

Maxime.
User avatar
Henk Timmermans
Posts: 114
Joined: 12 Feb 2011, 12:36
Location: Maarssen Netherlands

Re: ProSim737 Version 1.16

Post by Henk Timmermans »

Marty and Hanne

The first test with this new improvement was very succesfull in my case.
- Fuel cutoff switches are now enforced by ProSim whenever possible, to stop incorrect starting of engines
With N2 at 19.5 % the fuel cutoff switches start the engines correct.

Thanks for this and the other items in the new version.

Henk Timmermans
User avatar
willow
Posts: 2242
Joined: 20 Jul 2011, 14:24
Location: YMHB. Van Diemen's Land, Terra Australis
Contact:

Re: ProSim737 Version 1.16

Post by willow »

Some excellent refinements. Thank you, WilloW
WilloW (YMHB) 🇦🇺 Always
https://www.flaps2approach.com
Realism using OEM parts ✈️
Avatar: "Miss Tara Black Dog" (sadly missed....RIP Nov 2013)
ian@737ng.co.uk
Posts: 79
Joined: 11 May 2011, 12:17

Re: ProSim737 Version 1.16

Post by ian@737ng.co.uk »

this is just getting better and better.........
the added gates will really extend my sound environment. thanks chaps.
let's be fair, there now is no real alternative is there :D
regards

ian
Still Got The Beer Fridge
http://www.737ng.co.uk
User avatar
JWS
Posts: 2172
Joined: 18 Feb 2011, 19:24
Location: The Netherlands

Re: ProSim737 Version 1.16

Post by JWS »

Hanne wrote:July 26 2012 Release version 1.16
==================================
- Increased width of magenta line
Thanks, looks better.
Hanne wrote: - Added CDU EXEC light to ProSim737
:?: :?:
Hanne wrote: - VNAV improved to prevent switching from CLB to CRZ mode before reaching cruise altitude
Good, now let's get rid of that darned "UNABLE CRZ ALTITUDE" message, which I'm still getting at the most weird moments.

Cheers,
JWS
europa345
Posts: 2852
Joined: 23 Dec 2010, 08:42
Location: Madrid-Spain

Re: ProSim737 Version 1.16

Post by europa345 »

- Added vertical bars to ground alt indicator in PFD Alt tape :geek: :geek: :geek:

What is this?


thanks a lot Mary &Hanne

miguel
Image
belgianguy
Posts: 2963
Joined: 29 May 2011, 20:45
Location: Belgium

Re: ProSim737 Version 1.16

Post by belgianguy »

europa345 wrote:- Added vertical bars to ground alt indicator in PFD Alt tape :geek: :geek: :geek:

What is this?


thanks a lot Mary &Hanne

miguel
Hi Miguel,

I think Frazer asked this to add in ProSim a few days ago.
http://www.prosim737.com/forum/viewtopi ... =14&t=2623

Regards,
Gert
Best Regards,
Gert
Locked

Return to “ProSimB738 announcements”