Problem to final approach

Post Reply
Dani95240
Posts: 5
Joined: 21 Jul 2020, 22:28

Problem to final approach

Post by Dani95240 »

Dear Teams PROSIM,


Software B737 : 3.07

FS20 : Last Updated

W10 Home : Last Updated


I meet a issue with my B737 PROSIM.


During the approach, full established (LNAV and VNAC active), when I deactivated AP to do a Manual Landing, my plane goes up (about +7000ft/min) and it's very difficult to put the nose down...


I've like to know if this issue is due to updated fo FS20 or your software ? 


All my axis is configure to PROSIM, no axis is configured into FS20 and FSUIPC.


Could you help me to resovle this problem ? 


Best Regards
Brisi
Posts: 52
Joined: 11 Jan 2013, 14:07
Location: Schweiz LSZH Ice590

Re: Problem to final approach

Post by Brisi »

Hello everyone,
the problem can be solved.

Basically, the problem with me was exactly the same.
I then switched on the navigation support (filter world map below) All.
I could hear the radio signal and landed 5 times with ILS.
Without problems.

Best regards
Ralf
P3Dv4.5
Windows 10 at 3 Computer
Yoke and FWD AFT Overhaed Opencockpits
MIP and Rest CP Flight
Dani95240
Posts: 5
Joined: 21 Jul 2020, 22:28

Re: Problem to final approach

Post by Dani95240 »

Hi ralf

Where do you find thé navigation support?

Into msfs20 or into prosim software ?
Could you take screenshot please?

Thanks
Brisi
Posts: 52
Joined: 11 Jan 2013, 14:07
Location: Schweiz LSZH Ice590

Re: Problem to final approach

Post by Brisi »

1. Open MSFS
2. Then click on the globe
3 click "Filter" at the bottom in the middle
4 scroll down there is the navigation support.
5 Activate all.
P3Dv4.5
Windows 10 at 3 Computer
Yoke and FWD AFT Overhaed Opencockpits
MIP and Rest CP Flight
Post Reply

Return to “FS2020”