Push Button Encoders

Post Reply
Bernie
Posts: 4934
Joined: 01 Jun 2011, 13:36
Location: Riverland South Australia

Push Button Encoders

Post by Bernie »

Hi Humberto,

Would it be possible to have the frequency changing encoders which are now as outer and inner shaft also have the function of push and turn like the bank angle is already so that pushed and turned changes the before decimal point and normal turn only changes the after decimal point. Dual encoders are quite expensive where as push button encoders are relatively cheap. :D
Kind Regards

Bernie.
Bernie
Image
Bernie
Posts: 4934
Joined: 01 Jun 2011, 13:36
Location: Riverland South Australia

Re: Push Button Encoders

Post by Bernie »

Hi,

I no longer need any help with this as I found a way in Mobiflight to have the different sections of the frequency change when holding the encoder button and then turning it. The same as Prosim does for the bank Angle. :D
Kind Regards

Bernie.
Bernie
Image
Post Reply

Return to “ProSimB738 - Needs & Wishes”