ProSimB38M version 1.13

Locked
User avatar
martin.vsetecka
Posts: 209
Joined: 01 Aug 2016, 16:47

ProSimB38M version 1.13

Post by martin.vsetecka »

Dec 13 2021 Release Version 1.13
======================================
System:
- [APU] Fixed missing APU DOOR element
- [FMS] Fixed wind data source
- [FMS] Fixed CDU crash when adding PBD waypoint at the end of flight plan
- [FMS] Fixed manual N1 reset
- [Landing gear] Fixed brake temperature indication
- [Electrical] Fixed wrong Ampere values
- [PROSIM737-182][Autoflight] Fixed AP engaging with trim cutout
- [PROSIM737-182][Autoflight] Added control column cutout functionality
- [Engines][Startup] Logic reviewed and improved
- [Engines] Fixed Shutdown engine problem
- [Engines][Commercial] Added severe damage failure
- [Engines][Startup] Fixed N1 ending difference from start sequence and P3D model
- [Engines] Fixed reversers when switch is used as input

Displays:
- [Displays] Added lower and upper MIP panels
- [ProSimDisplay][ND] Fixed terrain annunciations
- [ProSimDisplay][ND] Draw of navigation objects limited in half screen ND
- [ProSimDisplay][ND] Fixed terrain sweep start effect
- [ProSimDisplay][PFD] Fixed FMA highlight fix
- [ProSimDisplay][PFD] Fixed terrain and weather in Minimap
- [ProSimDisplay] Fixed display unit failures
- [Commercial][FPT] Added FPT MIP

Drivers:
- [CPFlight] Fixed BLEED LEFT / BLEED TRIP LEFT swapped indicators

Misc
- [QTG] Fixed QTG transport delay screens
- [FS2020][Autoflight] Tuned MCP speed / level change mode
- [FS2020][Simconnect][Communications] Fixed COM1 handling
- [ProSimIOS] Fixed airworks altitude
- [WebIOS][Commercial] Fixed some elements missing from SERVICE tab
- [Misc] Added further log to webserver
- [Misc] Fixed several sim elements linked to incorrect license
Martin Vsetecka
ProSim Support
Locked

Return to “ProSimB38M Announcements”