1.08b1 - Gear disagree

Post Reply
eiketre
Posts: 133
Joined: 31 Oct 2020, 12:36
Location: Norway

1.08b1 - Gear disagree

Post by eiketre »

1.08B1, FSUIPC, Prepar3D, Sismo.
Short feedback:
I got gear disagree when departing. All green and red light illuminated after selecting gear up. Green in ovh. Followed NNC and returned to dep. Normal Hyd.
Status in ProSim showed gear up and all lights where illuminated. There were no failures in ProSim IOS. All failure cleared just to test. Not solved. I did not have this in 1.07b3.

regards
User avatar
wpslider
Posts: 6524
Joined: 06 Feb 2013, 18:38
Location: Faro - PT
Contact:

Re: 1.08b1 - Gear disagree

Post by wpslider »

Got it.
Fixed with b2

Regards
Humberto Miguel
Image
eiketre
Posts: 133
Joined: 31 Oct 2020, 12:36
Location: Norway

Re: 1.08b1 - Gear disagree

Post by eiketre »

wpslider wrote: 29 May 2021, 10:52 Got it.
Fixed with b2

Regards
Yes, it is working again with 1.08b2 :-)
One small thing i noticed, but have not checked more. Progress page disapeard, or unable to load, on short final doing RNP apch. (RNPX19R ENGM). Both CDU.

regards
Post Reply

Return to “ProSimB38M - Pre-releases”