Prosim737 very slow from 3.08b15

Post Reply
mroschk
Posts: 86
Joined: 26 Jun 2021, 09:47
Location: Germany

Prosim737 very slow from 3.08b15

Post by mroschk »

Hello,

regarding to this Thread : https://forum.prosim-ar.com/viewtopic.p ... ead#unread i want to report that i find out
that the System overall runs very very slow since Version 3.08b15.
In version 3.08b14 all runs very fast abd stable, but since version 3.08b15 something went wrong.
The Async slow ( whatever this means ) turns red all the time and also some other numbers.

I had this feeling since a while, but thought it will be fixed, but it did not.

After i had this issue with the Speedbrake Extended Light i find this out after a hole Day of testing.

Now i open this Thread becasue it is another Problem and hope this was OK.

I would stay on 3.08b14, but here the Lights ( Landing/Fixed and so on ) did not work in this version and the Release Notes states:

Code: Select all

- [FM] Improved flight model detection
Maybe that the Reason for the slow reaction of Prosim.

Hope you can fix this ( becasue i also need the Lights :-) )

Matthias
Attachments
3.08b15.JPG
3.08b14.JPG
Prepar3D v5.2.22.27615
Active Sky P3D
Logitech Yoke
own build Throttle via Opencockpits Cards and DC Motors
CH Pro Rudder Pedals
FWD OVHD vial Opencockpits
AFT OVHD in planning
Pedastel partially done via Arduino Ethernet
mroschk
Posts: 86
Joined: 26 Jun 2021, 09:47
Location: Germany

Re: Prosim737 very slow from 3.08b15

Post by mroschk »

Hello again,

i am still searching my System if the Problem is maybe to found here, but i did not found anything.

Can pls. anyone confirm, that Prosim runs very slow when FSUIPC or/and FSUIPC Support is selected in Prosim Systems on the Main Tab ?

Thanks a lot
Matthias
Prepar3D v5.2.22.27615
Active Sky P3D
Logitech Yoke
own build Throttle via Opencockpits Cards and DC Motors
CH Pro Rudder Pedals
FWD OVHD vial Opencockpits
AFT OVHD in planning
Pedastel partially done via Arduino Ethernet
Bernie
Posts: 4931
Joined: 01 Jun 2011, 13:36
Location: Riverland South Australia

Re: Prosim737 very slow from 3.08b15

Post by Bernie »

Hi Matthias,

I see you re having a problem with V3.08b15 but not with V3.08b14, I am curious as to why you have not tried the latest V3.08b50 as there have been may changes since the versions you are referring to here. Surely it would not hurt to try the latest beta. I am on the last beta and with no issues and using simconnect.
Kind Regards

Bernie.
Bernie
Image
mroschk
Posts: 86
Joined: 26 Jun 2021, 09:47
Location: Germany

Re: Prosim737 very slow from 3.08b15

Post by mroschk »

Hello,

ahm...i had the issue with 3.08b50.
That was the reason to switch back version at version until i found out, that the issue starts at version 3.08b15.
So...for sure i tried 3.08b50, but there is the issue present. Thats the problem.

You wrote you have no problems with b50 and simconnect ?
Have you tried to ARM the Speedbrakes and have you had a look at the ARMED and EXTENDED Lights ?
Also yesterday i see, that i can bring out the AirStairs via WebIOS, but i can not bring them IN .

All other is working fine so far with 3.08b50, only these two things.

1. important....the Speedbrake Extend Light is on when i arme the Speedbrakes and set Flaps more then 15
2. the Airstairs are not working in 2 ways, can only bring them out, not in again.

Matthias
Prepar3D v5.2.22.27615
Active Sky P3D
Logitech Yoke
own build Throttle via Opencockpits Cards and DC Motors
CH Pro Rudder Pedals
FWD OVHD vial Opencockpits
AFT OVHD in planning
Pedastel partially done via Arduino Ethernet
Post Reply

Return to “ProSimB738 - Technical support - software related”