SimSounds 3.0 released

pandine
Posts: 488
Joined: 31 Dec 2014, 08:45
Location: Germany

Re: SimSounds 3.0 released

Post by pandine »

Daniel M. wrote: 12 Oct 2019, 23:28 in the psu there are only turkish: disable; prosim and only front left!
no box with sync !!!
the sound for the doors comes but from the outside the doors stay closed. no matter what I put in the psu
Here we go ... ;-)
Bildschirmfoto 2019-10-13 um 08.37.30.png
Best Regards,
Thomas
http://www.simsounds.de

Image
mlf081161
Posts: 287
Joined: 25 Nov 2016, 23:41

Re: SimSounds 3.0 released

Post by mlf081161 »

Dear Thomas,

Thanks for the update 3.0 really nice to have the engine function this makes it more en more complete and realistic.
Everything works fine by me, I just had to install the 3.0 version new , updating the 2.11 version did not work on my PC but that was not a problem.
Again fantastic work.

Just a question related to the settings of my buttkicker.
When I adjust my buttkicker (with the up and low buttons) towards the level I like this setting will not stay there after restart.
After restart I have to adjust again my buttkicker levels again so it seems there is no setting-memory in the buttkicker is that normal?
I did some research in google but cannot find anything about that.
You are also using buttkickers therefore my question.
Looking forward to your experience.



regards Michel
Michel

P3D V4-Prosim 3

Flyengravity MIP
CP Flight MCP/EFIS and Pedestal
OC Overhead V2
Cockpit sonic Throttle fully motorised
Flyengravity CDU V2
Simsounds
GSX 2
ORBX Scenery
pandine
Posts: 488
Joined: 31 Dec 2014, 08:45
Location: Germany

Re: SimSounds 3.0 released

Post by pandine »

mlf081161 wrote: 13 Oct 2019, 11:02 Dear Thomas,

Thanks for the update 3.0 really nice to have the engine function this makes it more en more complete and realistic.
Everything works fine by me, I just had to install the 3.0 version new , updating the 2.11 version did not work on my PC but that was not a problem.
Again fantastic work.

Just a question related to the settings of my buttkicker.
When I adjust my buttkicker (with the up and low buttons) towards the level I like this setting will not stay there after restart.
After restart I have to adjust again my buttkicker levels again so it seems there is no setting-memory in the buttkicker is that normal?
I did some research in google but cannot find anything about that.
You are also using buttkickers therefore my question.
Looking forward to your experience.

regards Michel
Hi Michel,

where did you install SimSounds? May be SimSounds.exe has no write permission to save your settings to SimSounds.ini?
Best Regards,
Thomas
http://www.simsounds.de

Image
mlf081161
Posts: 287
Joined: 25 Nov 2016, 23:41

Re: SimSounds 3.0 released

Post by mlf081161 »

Hai Thomas,

I think you misunderstood me.
The simsounds settings are oke they are saved also after restart.

It is just my " power lever" of my Buttkicker this setting is not saved after restart.
So when I set my buttlever power level ( on my buttkicker remote control) this is not saved.
After restart level is again at lowest level.

Any idea?

regards Michel

{PS : Simsounds is installed in Program files with all the rights etc
Michel

P3D V4-Prosim 3

Flyengravity MIP
CP Flight MCP/EFIS and Pedestal
OC Overhead V2
Cockpit sonic Throttle fully motorised
Flyengravity CDU V2
Simsounds
GSX 2
ORBX Scenery
pandine
Posts: 488
Joined: 31 Dec 2014, 08:45
Location: Germany

Re: SimSounds 3.0 released

Post by pandine »

mlf081161 wrote: 13 Oct 2019, 16:35 Hai Thomas,

I think you misunderstood me.
The simsounds settings are oke they are saved also after restart.

It is just my " power lever" of my Buttkicker this setting is not saved after restart.
So when I set my buttlever power level ( on my buttkicker remote control) this is not saved.
After restart level is again at lowest level.

Any idea?

regards Michel

{PS : Simsounds is installed in Program files with all the rights etc
Ah ... okay. But unfortunately I have no idea. Sorry, Michel.
Best Regards,
Thomas
http://www.simsounds.de

Image
mlf081161
Posts: 287
Joined: 25 Nov 2016, 23:41

Re: SimSounds 3.0 released

Post by mlf081161 »

Oke Thanks Thomas will adjust then every flight again is also not a real problem but it could be easier.

regards Michel
Michel

P3D V4-Prosim 3

Flyengravity MIP
CP Flight MCP/EFIS and Pedestal
OC Overhead V2
Cockpit sonic Throttle fully motorised
Flyengravity CDU V2
Simsounds
GSX 2
ORBX Scenery
Daniel M.
Posts: 452
Joined: 09 Oct 2017, 23:07

Re: SimSounds 3.0 released

Post by Daniel M. »

pandine wrote: 13 Oct 2019, 07:39
Daniel M. wrote: 12 Oct 2019, 23:28 in the psu there are only turkish: disable; prosim and only front left!
no box with sync !!!
the sound for the doors comes but from the outside the doors stay closed. no matter what I put in the psu
Here we go ... ;-)

Hello Thomas, the hook is set and was always set. visually the doors do not open.
but that should not be your problem, thank you for your help !! great support
greetings

Bildschirmfoto 2019-10-13 um 08.37.30.png
Attachments
20191014_202520.jpg
Daniel M.
Posts: 452
Joined: 09 Oct 2017, 23:07

Re: SimSounds 3.0 released

Post by Daniel M. »

https://youtu.be/-9xrwknFBU8

Hello Thomas, do you think it would be possible to record this sound in simsound?
after touchdown min.2.40
For the people who do not have a motorized TQ, it would be very useful.
Greetings Daniel
pandine
Posts: 488
Joined: 31 Dec 2014, 08:45
Location: Germany

Re: SimSounds 3.0 released

Post by pandine »

Daniel M. wrote: 25 Oct 2019, 21:52 https://youtu.be/-9xrwknFBU8

Hello Thomas, do you think it would be possible to record this sound in simsound?
after touchdown min.2.40
For the people who do not have a motorized TQ, it would be very useful.
Greetings Daniel
Hmm ... any other guys who would like this?
Best Regards,
Thomas
http://www.simsounds.de

Image
Torcs
Posts: 39
Joined: 09 Dec 2015, 07:38
Location: Norway - Stjørdal

Re: SimSounds 3.0 released

Post by Torcs »

Yes please :)
Post Reply

Return to “SimSounds - by Pandine”