Parking brake switch doesn't work with Prosim

Post Reply
frazer
Posts: 1844
Joined: 24 Dec 2010, 01:13
Location: Stockholm, Sweden
Contact:

Parking brake switch doesn't work with Prosim

Post by frazer »

I have the RUDDER TRIM Panel (P&P) (https://www.skalarki-electronics.eu/onl ... l-p-p.html), and the rudder trim buttons and display works fine. But I can't get the parking brake to work with Prosim. When I test the switches in the IO Test in the Profiler software, they work.

Any ideas?
Image
Piddy
Posts: 56
Joined: 29 Oct 2019, 17:16
Location: EDDL

Re: Parking brake switch doesn't work with Prosim

Post by Piddy »

Take a look at combined config settings MIP ->Switch -> Parking brake OFF and ON, Entry should be : NOT CONNECTED. So Skalarki can work on it. :)
Post Reply

Return to “Skalarki”