A320 PBR 2020 Issues

Post Reply
Pim
Posts: 815
Joined: 01 Jan 2011, 13:39
Location: Heemstede, The Netherlands
Contact:

A320 PBR 2020 Issues

Post by Pim »

Hallo Lapi,

I found two problems with this model:
1) There is no rumbling sound anymore when the gear is lowered and down.
2) With the GREEN hydraulics off, the gear has to be lowered with the manual gravity extension handle. That works fine, except that the wheel doors should NOT close, since there are powered by the GREEN hydraulics system. On the ECAM this is modeled well, but on the outside model the doors close.

Best regards,

--pim
Lapi
Posts: 2947
Joined: 26 Nov 2011, 02:00

Re: A320 PBR 2020 Issues

Post by Lapi »

Pim wrote: 29 Jul 2020, 13:18 On the ECAM this is modeled well, but on the outside model the doors close.
Hi --pim,

Unfortunately P3D only allows a single animation of any object. Of course it can be made conditional but that is Marty's table and in case you can persuade him to handle two variables instead of just a single one, I can easily separate the doors, so they would work independently.

regards
Lapi
obalik
Posts: 1
Joined: 18 Jan 2021, 19:10
Location: istanbul
Contact:

Re: A320 PBR 2020 Issues

Post by obalik »

I couldn't see this bug
Pim
Posts: 815
Joined: 01 Jan 2011, 13:39
Location: Heemstede, The Netherlands
Contact:

Re: A320 PBR 2020 Issues

Post by Pim »

Hi,

Interesting! Perhaps it is fixed. I'll check again tomorrow.

Best regards,

--pim
Post Reply

Return to “ProSimA320 - ProSimA320 Flight Model”